VentiQuattro-LED DMX - 24 Channel Dimmer Constant Voltage CONTDMX24CH12V24VLED

CONTDMX24CH12V24VLED
Dimmers
$400.64
$400.64

INTRODUCING OUR MOST ADVANCED STANDALONE DMX CONTROLLER EVER
 - NOW WITH NEW PROTECT-A-FET TECHNOLOGY -

Building off of the successes from the Cinque-LED DMX Dimmer, we are now introducing a 24-channel version of the controller.  It features the same high precision dimming from 0 - 100% with precise low-end dimming.  It includes Protect-A-Fet protection on each output channel allowing for short circuit protection on each dimming channel.  This ensures that if there is an accidental short on one of the outputs, a quick power cycle of the unit will allow for continued use AND no internal damage will result.

The VentiQuattro LED Dimmer has all the features our film, television, and theatrical friends have been asking for. It is an extremely durable metal, rugged housing with professional-grade XLR 5-Pin In/Out and RJ45 In/Out for DMX signal. The terminal blocks used for the input have two spaces for Voltage + and two spaces for GND which allow for the huge current capability this unit has 24 X 4A = 96 AMPS of power!

Need more power per output?  No problem.  Just change the settings to group some of the output channels together. 

This unit also has a easy-to-read LED display for setting address and manual mode settings. The VentiQuattro-LED DMX Dimmer has 8 bit and 16 bit resolution modes as well as output PWM frequency adjustable settings from 500Hz to 35kHz.  On top of all of that there is ALSO a gamma curve value which adjusts the dimming curve of the unit so you can have an extremely high resolution low end or an extremely high resolution high end. It's entirely up to you!

The Venti-Quattro-LED DMX Dimmer is BY FAR the most advanced standalone DMX Decoder controller unit on the market, EVER!

This controller can be used with all of our FlexLED Tape products and Modules

  • This unit converts DMX-512/1990 standard digital signal into five dimmable channels.
  • Uses RJ45 Ethernet or 5-pin XLR connectors?to control LEDs via any lighting console or through computer software.
  • Can create over 16 million colors when used with our Colorful (RGBA or RGBW or RGB OR Bi-Color OR White) FlexLED Tape
  • LED Interface provides easy functionality for DMX addressing as well as full manual mode & test control options.
Technical Parameters

Output Current (A)

:

24 CH @ 4A/CH = Max 96A

Output Power (W)

:

1152W @ 12V / 2304W @ 24V

Supply Voltage

:

12V - 24V DC

Size (MM)

:

265 X 111.5 X 40 

Working Temperature

:

-20°C to + 70 °C

Weight

:

350g

PWM Frequency

:

500Hz to 35kHz

IP Rating

:

IP40

Flicker Free

:

YES

Bit Rate

:

8 Bit & 16 Bit

 
 **Connector Tails Not Included**
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!