ML12 Panel FlexLED Indoor 1152MM Bare end wires 24VML12BC1152MMW

LED Fixture

ML12 panel is a Bi-Colour (3000k - 5600k) cuttable, foldable panel and high output LED panel.

The panel was designed to fill the inside length of a 4' frame.  5 of these panels across will fill a 4' x 4' frame that is standard use on film & television sets around the world.  It's outside dimensions are 45.35" X 8.97" and has an extremely high density quantity of LEDs creating a very soft and uniform output.

Customized Lengths Available.

Suitable for on-camera use, or anywhere a high-quality LED product is required.

3M 200MP double-sided tape on the back which makes installation as easy as peel n stick.

Maximum recommended length in order to prevent line-loss is four panels.
Controller, Power supply and Extension Cables sold separately

Soldering Guidelines:
Soldering iron should be between 360°C and 372°C.  Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.



Product Type : ML12 Colour Temperature Adjustable Panel
Product Code : 24VML12BC1152MMW
CRI : 95+ 
Kelvin : 3000k -> 5600k
PCB Color : White
Current, Rating : 4.58 A / panel
Voltage : 24 VDC
Wattage : 110 W / panel
CC / CV : Constant Voltage
IP Rating : IP43
Lumens @ Full : N/A
Lumen / Watt : 67.7
Lifetime* : 30,000 hours
Cutting Size : 500 MM 
LED Quantity : 1380 LEDs per panel (690 @ 3000k, 690 @ 5600k)
Number of Contacts : 3
LED Type : 2835
Copper Quantity : 3 Oz.
Temperature, Operating, Maximum : 70 C
Temperature, Operating, Minimum : -40 C
Agency Ratings : UL - E489028, CE, RoHS
PCB Size : 228MM X 1152MM 
Maximum Recommended Length : 1 Panel
Viewing Angle : 120
Adhesion : 200MP 3M
Wavelength A Red : N/A
Wavelength B Green : N/A
Wavelength C Blue : N/A
Wavelength D & E : Full Spectrum 2700k & 5600k Chips




  1.  Specification Sheet

  2.   UL Certificate of Compliance


The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!