Sold Out

Pixel FlexLED 5V Individual Chip Control Indoor Bare end wires 96 LEDs/Meter

I5VRGB480WS2812B
LED Tape
$287.71

48, 72, 60, and 96 LED/Meter PixelFlex LED Tape RGB in 5V DC

Mid frequency and high quality WS-2812-B chips provide individual control to each pixel for dazzling effects and endless possibilities. Control these strips with our PixlArt 416 controller via ArtNet or sACN data signals.
Suitable for on-camera use and flicker-free up to 60 fps at most camera settings. 2 kHz operating frequency. 60 LED/meter currently available in Black PCB.

Soldering Guidelines:
Soldering iron should be between 360°C and 372°C.  Please ensure not to heat each solder pad for longer than 3 seconds otherwise separation of the solder pads can occur.

Indoor and weatherproof strips have 3M double-sided tape on the back which makes installation as easy as peel n stick. 

Waterproof must be mounted using silicone glue or similar.
Controller, power supply and extension cables sold separately
Quantity discounts and custom color temperatures available.

SPECIFICATIONS - INDOOR PRODUCT
Product Type : 96 LED/meter
Product Code : I5VRGB360WS2812B
CRI : N/A
Kelvin : N/A
PCB Color : White
Current, Rating : 5.76 A / meter
Voltage : 4.5 ~ 5.5 VDC
Wattage : 28.8 W / meter
CC / CV : Constant Voltage
IP Rating : IP43
Lumens @ Full : 124.8
Lumen / Watt : 4.46
Lifetime* : 30,000 hours
Cutting Length : Individual LED - 1.3 CM
LED Quantity : 96 LED / meter
Number of Contacts : 3
LED Type : WS2812B
Copper Quantity : 3 Oz.
Temperature, Operating, Maximum : 70 C
Temperature, Operating, Minimum : -40 C
Agency Ratings : UL - E489028, CE, RoHS
PCB Width : 10 MM
Maximum Recommended Length : 2.5 meters
Viewing Angle : 120 degree
Adhesion : 3M 300LSE
Operating Frequency : 2 kHz
Wavelength A : 620 ~ 625nm
Wavelength B : 522 ~ 525nm
Wavelength C : 465 ~ 467nm
Wavelength D : N/A
Data Transmission Speed : 800 kHz
Refresh Rate : 30 FPS
Bit Rate : 24 Bit
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!